Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power-on Password (8543)



  Power-on Password
To service a computer with an active, unknown, power-on password, do the following.
  1.  Power-off the computer and unplug the power cord.
  2.  Remove the system-unit cover.
  3.  Move the password jumper J23 to connect the center pin and the pin on  the opposite end of the connector.
  4.  Power-on the computer to erase the password. There is no need to move  the jumper back to the previous position.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.