Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

NO-Beep Symptoms Micro Channel


Symptom/Error:    FRU/Action.
  
No beep, fan runs, Power-on LED lights, 1. Processor Cache (90/95)
memory may or may not count, and
blinking cursor continuously loops.
Memory count hangs during POST. 1. System Board Memory
Check memory) 2. Memory Option (if installed)
  3. System Board
  4. Processor
  
No beep, power-on indicator does not come 1. Adapter Guide/Switch Assembly
on, and fan does not run. 2. Power Supply
Important: On computers with a 3. Control/Speaker Assembly
tamper evident switch, when the cover off, 4. Processor Board (90/95)
the switch must be in the 'up' or 'on' 5. System Board
position to supply power to the computer. 6. Any Device or Adapter
Also, the switch might be out of 7. Bus Adapter
adjustment (not making contact).
Remove the switch and form the
contacts. If this is not the problem
see Undetermined Problems
No beep, fan runs, and 000215XX is 1. System Board Memory
displayed. (Check memory) 2. Processor Board (90/95)
  3. System Board
  
No beep, fan runs, and 000258XX is 1. System Board
displayed. (Check memory)
No beep, fan runs, power-on indicator 1. System Board
is on, and computer hangs during 2. Processor Board
POST with a message displayed. 3. Power Supply
see Undetermined Problems
No beep and the computer is otherwise 1. Control/Speaker Assembly
functional. 2. Processor Board (90/95)
  3. System Board
  
No beep and the computer is not 1. System Board
functional. 2. Power Supply
see Undetermined Problems
No beep, fan run, power-on indicator 1. System Board
is on, and computer hangs during POST 2. Processor Board (90/95)
with no message displayed. 3. Any Device or Adapter
see Undetermined Problems 4. Bus Adapter


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.