|
34 Pin Connector (to system cable ) Pin No. |
Signal Name | 40 Pin Connector (to backup unit) Pin No. |
---|---|---|
1 | 2nd Drive installed | 1 |
2 | -High Density Select | 2 |
3 | + 5 Vdc | 38 |
4 | Ground | 4 |
5 | Ground | 5 |
6 | + 12 Vdc | 40 |
7 | Signal Ground | 7 |
8 | -Index | 8 |
9 | (No Connection) | 9 |
10 | -Motor Enable 0 | 10 |
11 | Signal Ground | 11 |
12 | -Drive Select 1 | 12 |
13 | Ground | 13 |
14 | -Drive Select 0 | 14 |
15 | Signal Ground | 15 |
16 | -Motor Enable 1 | 16 |
17 | (No Connection) | 17 |
18 | -Direction | 18 |
19 | Signal Ground | 19 |
20 | -Step | 20 |
21 | Signal Ground | 21 |
22 | -Write Data | 22 |
23 | Signal Ground | 23 |
24 | -Write Enable | 24 |
25 | Signal Ground | 25 |
26 | -Busy | 26 |
27 | (No Connection) | 27 |
28 | -Write Protect | 28 |
29 | Signal Ground | 29 |
30 | -Read Data | 30 |
31 | Signal Ground | 31 |
32 | -Head 1 Select | 32 |
33 | (No Connection) | 33 |
34 | -Ready | 34 |
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.