Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Viewing the test log



Viewing the test log

Errors reported by the diagnostic test will be displayed by the program as a failed test.

To view details of a failure or to view a list of test results, do the following from any test category screen:


SIMM/DIMM memory errors:

SIMM/DIMM error messages issued by the IBM PC Enhanced Diagnostics:

Message Failure Found Recommended Actions
2xx-1y A memory error was
detected in SIMM
socket Y		 Replace the SIMM in the socket
identified by the last digit
of the error code. Re-run the
test. If the same error code
occurs again, replace the
system board.
2xx-2y A memory error was
detected in DIMM
socket Y		 Replace the DIMM in the socket
identified by the last digit
of the error code. Re-run the
test. If the same error code
occurs again, replace the
system board or where memory
is on the processor card,
replace the processor card.
Corrupt
BIOS		 Information in BIOS
is not as expected.
Not able to find
expected DMI
information from
BIOS. Memory
controller chipset
vendor ID does not
match expected
value.		 Reflash the BIOS.
Replace the system board.
Test
aborted
by user		 User stopped test. Restart test.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.