Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Removing drives from the drive bay assembly



Removing drives from the drive bay assembly

To remove drives from the drive bay assembly, do the following:
  1.  If the drive being removed has nonremovable media,  remove the bay panel (bezel).
    1.  Locate the appropriate bay panel (bezel) in the front of the server.
    2.  Use the tip of a screwdriver, if necessary, to release the  plastic tabs that hold the bay panel at the front of the server.
    3.  Remove the bay panel.
  2.  Disconnect the cables from the drive that you want to remove.
  3.  Remove the visible screws that hold the drive and  slide it out the front of the server.
  4.  If you are not installing another drive, replace the bay panel (bezel).
  5.  If you want to install or remove any other options, do so now.  Otherwise, go to Completing the Installation.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.