Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

No Beep Symptoms



No Beep Symptoms
Symptom    FRU/Action
No Beeps occur after 1. Run Configuration/Setup, set the Start Options
successfully completing     Power-On Status to enable.
POST 2. Check speaker connection.
(The Power-On Status is 3. Speaker
disabled.) 4. System Board
  

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.