 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
ISA and PCI Adapters
ISA and PCI Adapters
The server uses a riser card for expansion.
The riser card contains expansion slot connectors that connect adapters to the
industry standard architecture (ISA) and peripheral component interconnect (PCI) buses.
You can install a variety of adapters in the expansion slot
connectors on the riser card. For information on locating
the riser card, see
System Board Illustration
8476 /
8477.
For an illustration of the expansion slots that
are located on the rear of the server, see
Input/Output Connectors.
The riser card in the server has three dedicated ISA slot
connectors and three dedicated PCI slot connectors.
Notes:
- Alert on LAN and Asset ID are available on some models only.
- If you attach a 4-position cable connector to the
2-pin Modem Wakeup connector, ensure that the
unused positions are next to the bottom of the riser card ,
If this cable is incorrectly attached, the server might
automatically restart each time that you Power-off the power.
- Attention - To avoid
possible damage to adapters and server
components, be sure that the adapters that you install
do not touch each other or the other components
(such as the microprocessor) inside the server.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.