Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Using the Mini-Configuration Program (ServeRAID)



Using the Mini-Configuration Program


The Mini-Configuration program is a quick way to display the adapter settings, and perform a limited set of the configuration functions without using the SCSI-2 Fat/Wide PCI-Bus Adapter Configuration Option Diskette.

To access the ServeRAID adapter Mini-Configuration program:
  1.  Power-on the server, or, if the system is on, press Ctrl+Alt+Del.
  2.  Press Ctrl+I immediately when the Mini-Configuration prompt appears on the screen.

     

  3.  Press Enter

     If you have more than one ServeRAID adapter installed, you will get an adapter selection screen, otherwise, the Main Menu appears.

  4.  Select a menu item, press the number of the item or use the Up Arrow (  ) key or the Down Arrow (  ) key to highlight the item, then press Enter
  5.  Follow the instructions on the screen.
  6.  Select Exit to leave the Main Menu.


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.