Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Viewing the ServeRAID Configuration



Viewing the ServeRAID Configuration

Before creating or changing a disk array, you can look at the current configuration by selecting View Configuration from the Main Menu of the RAID configuration program.

To view the disk-array configuration:
  1.  Start the ServeRAID configuration program (see 'Start the ServeRAID configuration program')
  2.  Select View configuration.  The current disk-array configuration information  appears on the screen.
  3.  Press Enter to see the stripe order in the Bay/Array list.  In the following example, data  for the A array is striped across  Channel 1, from bay 1, then bay 2, and so on, through bay 6

     

  4.  Press any key to return to the View Configuration screen.
  5.  Press Esc to return to the Main Menu.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.