|
|
| Error Symptom | FRU/Action |
|---|---|
| CD is not working properly. | 1. Clean the CD |
| 2. Clean the optical-head lens. | |
| 3. CD-ROM Drive | |
| CD-ROM drive tray is not working. | 1. Insert the end of a paper clip into the manual tray-release |
| (The server must be powered-on.) | opening. |
| If the server is on and the tray | 2. CD-ROM Drive |
| does not eject, | |
| CD-ROM drive is not recognized. | 1. Run Configuration/Setup, enabled primary IDE channel. |
| 2. Check cables and jumpers. | |
| 3. Check for correct device driver. | |
| Diskette drive in-use light | 1. The diskette drive is enabled in the configuration programs. |
| stays on, or the system | 2. The diskette is good and not damaged. |
| bypasses the diskette drive. | (Try another diskette if you have one.) |
| If there is a diskette in the drive, verify that: | |
| 3. The diskette is inserted correctly in the drive. | |
| 4. The diskette contains the necessary files to start the server. | |
| 5. The software program is OK. | |
| If the diskette drive in-use light stays on, or the system | |
| continues to bypass the diskette drive, replace the diskette drive. | |
| Fan (one only) not running. | 1. Swap fans to see if the fan is defective. |
| 2. Power Control Card | |
| 3. Fan Cable | |
| Fans (two only) not running. | 1. Check the connection between the fan cables and the power backplane. |
| 2. Fans | |
| 3. Power Control Card | |
| 4. Power Backplane | |
| Fans (all) not running. | 1. Check fan cables |
| 2. Power Control Card | |
| 3. Power Backplane | |
| Fans (all) continuously run fast. | 1. Power Control Card |
| 2. Front Panel Card | |
| 3. System Management Card | |
| Monitor problems (general) | 1. Monitor |
| Some IBM monitors have | 2. Display Adapter/I/O Function Card |
| their own self-tests. If you | 3. I/O Board |
| suspect a problem with the | |
| monitor, refer to the | |
| information that comes with | |
| the monitor for adjusting | |
| and testing instructions. |
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.