Identifying Problems through Status Indicators (Netfinity 7000-M10

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

Identifying Problems through Status Indicators (Netfinity 7000-M10 - Type 8680)

Identifying Problems through Status Indicators

The server has status indicators to help you identify problems with some server components.
Status indicators are located on the following components:

Hard disk drive trays. For more information, see 'Controls and Indicators'
Power supplies. For more information, see 'Power Supply LEDs'.
I/O board. For more information, see 'Installing a Hot-Plug PCI Adapter'.
Front panel. For more information, see 'Information LED Panel'.
Rear panel. For more information, see 'Input/Output Connectors and Expansion Slots'.

System Component Status Indicators:

Status indicators on the I/O board, processor board, memory board, and the Advanced Remote Management Controller can help identify problems.
The indicators are lit during POST to ensure the indicators operate.
After POST completes, the indicators show the status of the component.

For the location of the status indicators, see:

Processor Board LEDs

Indicator	Description

Microprocessor Bus	If activity on the microprocessor bus is
Activity LED	present, the indicator for the slot is lit.

Microprocessor VRM	If a VRM or processor fails or is missing,
Status LED	the LED will light.

Microprocessor	If proper termination of the microprocessor
Termination LED	slot 4 is present, the indicator is lit.

ERR 0 and	If either LED is on, see 'Symptom-to-FRU Index'
ERR 1 LEDs	for an explanation.

Memory Board LED

Indicator    Description

Memory Module    If a memory module is present and has

Status LED    failed, the indicator for the slot is lit.

Indicator	Description

Memory Module	If a memory module is present and has
Status LED	failed, the indicator for the slot is lit.

I/O Board LEDs

Indicator    Description

Power On LED    If power to a PCI slot is present, the

   indicator for the slot is lit.

Attention LED    The operating system defines the meaning

   of this indicator. Refer to the operating

   system documentation for more information.

Indicator	Description

Power On LED	If power to a PCI slot is present, the
	indicator for the slot is lit.

Attention LED	The operating system defines the meaning
	of this indicator. Refer to the operating
	system documentation for more information.

Advanced Remote Management Controller LEDs

Indicator    Description

Power On LED    If power to the Advanced Remote

   Management Controller is present, the

   indicator is lit.

Processor Error LED    If the processor on the Advanced Remote

   Management Controller has failed, the

   indicator is lit.

Ethernet Activity LED    If the Ethernet controller on the Advanced

   Remote Management Controller is

   transmitting data or receiving data, the

   indicator is lit.

Ethernet Link LED    If an active link to the Ethernet controller on

   the Advanced Remote Management

   Controller is present, the indicator is lit.

Indicator	Description

Power On LED	If power to the Advanced Remote
	Management Controller is present, the
	indicator is lit.

Processor Error LED	If the processor on the Advanced Remote
	Management Controller has failed, the
	indicator is lit.

Ethernet Activity LED	If the Ethernet controller on the Advanced
	Remote Management Controller is
	transmitting data or receiving data, the
	indicator is lit.

Ethernet Link LED	If an active link to the Ethernet controller on
	the Advanced Remote Management
	Controller is present, the indicator is lit.

Back to

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.