IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Starting the ServeRAID Background-Server Components

•  If you are using OS/2 or Windows, double-click on the IPSRAID ADMIN-MONITOR icon on the desktop.
•  If you are using OpenServer or UnixWare:
  1.  Make sure you are logged on as root.
     1.  If you are not, type:

        su

     2.  When prompted, enter the root password.

  2.  Start the background-server component (daemon) running in the background. To do this, type:

     ipsadm &

  3.  Press Enter.

•  If you are using Novell NetWare:
  1.  Load the remote component. To do this, type:

     load ipsadm.nlm

  2.  Press Enter.

NOTE:

1.  To load the NetWare Administration program with NetWare SFT III installed, load IPSADM.NLM in the mirrored  server engine. The ServeRAID adapters and controllers in the primary and backup servers will appear to the  Administration and Monitoring Program as if they were in one server.
2.  When a rebuild, synchronization, or logical-drive migration is in process, you cannot stop the IPSADM.NLM  module by pressing the Esc key. To stop the module during one of these operations, you must unload the IPSADM.NLM module.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.