 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
ServeRAID IPSSEND Program (Starting)
ServeRAID IPSSEND Program (Starting)
You can run the IPSSEND program from the operating system command line.
To start the IPSSEND program:
- If you are using OS/2 or Windows NT:
1. Type: c:\ipsadm\ipssend
2. Press Enter.
NOTE: The c represents the drive where OS/2 or Windows NT is installed.
- If you are using NetWare:
1. From the console, type: load ipssend
2. Press Enter.
1. Insert the bootable IPSSEND diskette that you created into diskette drive A,
then, type: a:\ipssend
2. Press Enter.
- If you are using OpenServer or UnixWare:
1. Type: /usr/bin/ipssend
2. Press Enter.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.