 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Starting the Configuration Program
Starting the Configuration Program
The ServeRAID Configuration Program runs in two
modes: the Configuration mode and the Information mode .
In the Configuration mode, you can create or delete disk
arrays, create or delete logical drives, and define your
hot-spare drives. When this mode is active, only a limited
set of functions is available from the Menu and Tool Bars.
See 'Configuration Mode' for more information.
In the Information mode, you can view the existing device
and configuration information for your ServeRAID
subsystem. When this mode is active, you can use the
functions available from the Menu and Tool Bars to
customize settings for your ServeRAID controllers. See
'Information Mode' for more information.
The ServeRAID Configuration Program is provided on the
IBM ServeRAID Configuration CD packaged with the
ServeRAID adapter, and it also is provided on the
ServerGuide CD (CD 1) that comes with some IBM server models.
Notes:
- If you are configuring a ServeRAID controller on
a system board, see the installation instructions
and CDs provided with your server for information about starting the configuration
programs for the server.
- To gain access to the ServeRAID Configuration or Mini-Configuration programs, you must restart
the server.
To start the configuration program:
- Insert the IBM ServeRAID Configuration CD (or the
ServerGuide CD 1) into the CD-ROM drive, then, turn on the server.
One of the following screens will appear:
- If the configuration program detects unconfigured
ServeRAID controllers, the program starts in the
Configuration mode and a screen similar to the
following appears.
Click on the Cancel button to switch from the
Configuration mode to the Information mode. all
ServeRAID controllers in the server are
configured, the program starts in the Information
mode and a screen similar to the following
appears.
Click on the icon on the Tool Bar to
switch from the Information mode to the
Configuration mode.
- Continue with one of the following:
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.