Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Recovery From RAID Adapter Failure



Recovery From RAID Adapter Failure


When a RAID adapter fails, you must replace the RAID adapter and then restore the RAID configuration to the new RAID adapter. There are three ways to restore the RAID Configuration: If you have a backup of the current RAID configuration, then perform the following steps:

  1.  Boot to the RAID Option Diskette.
  2.  Select Advanced Functions.
  3.  Select Restore/Convert Saved Configuration.
  4.  Insert the diskette that contains the backed up configuration, and press Enter.
  5.  A list of backup configuration names appears. Select the correct configuration name  and press Enter.
  6.  A confirmation window appears. Select Yes to restore the configuration or No to  return to the previous menu.


-OR-

If you do not have the most recent backup copy of the RAID configuration, then you can restore the array by using information stored on the hard drives. Use the following steps to perform this operation:
  1.  Boot to the RAID Option Diskette.
  2.  Select Advanced Functions.
  3.  Select Init/View Synchronize Config. from the Advanced Functions menu.
  4.  If there are drives connected to the adapter that are either not showing up or not  showing up as Ready (RDY), then select Initialize Configuration. This restores the  factory default settings on the RAID adapter and resets all functional hard disk drives  to the RDY state.
  5.  Select Configuration Synchronization from the Init/View Synchronize Config.  menu.
  6.  From this menu, select Hard Disk Drive as source. This retrieves the configuration  information from the hard drive. A confirmation window appears. Select Yes if you  want to restore the configuration or No if you do not want to restore the configuration.


-OR-
  1.  Press CNTRL+I during POST to enter the Mini-Config.
  2.  Select Advanced Functions.
  3.  Select Import Configuration.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.