Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Information LED Panel



Information LED Panel

The information LED panel on the front of the server contains status lights.
 

System Power Light: When this green light is lit, system power is present in the server. When this light flashes, the server is in standby mode (the system power supply is turned off and AC current is present). When this light is off, it indicates either power supply failure, an AC power failure, or a light failure.

Note: If this light is off, it does not mean there is no electrical current present in the server. The light might be burned out. To remove all electrical current from the server, you must unplug the server power cords from the electrical outlets.


System POST Complete Light: This green light is lit when the power-on self-test (POST) completes without any errors.


SCSI Hard Drive Activity Light: This green light is lit when there is activity on a hard drive.


System Error Light: This amber light is lit when a system error occurs. A light on the diagnostics LED panel will also be lit to further isolate the error. (For more information, see Symptom-to-FRU Index)


Processor 1 Activity Light: This green light is lit when there is activity on microprocessor 1 (the primary microprocessor).


Processor 2 Activity Light: This green light is lit when there is activity on microprocessor 2 (the secondary microprocessor).


Ethernet Speed 100 Mbps: When this green light is lit, the Ethernet speed is 100 Mbps.
Ethernet Link Status Light: When this green light is lit, there is an active connection on the Ethernet port.
Ethernet Transmit/Receive Activity Light: When this green light is lit, it indicates transmit or receive activity to or from the server.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.