Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

CD-ROM Drive



CD-ROM Drive

See > CD-ROM Jumper

An IDE CD-ROM drive is a standard feature on the server.
CD-ROM drives can play back or read from a CD, but cannot write information to it.
CD-ROM drives use industry standard, 12 cm (4.75-inch) CDs.

Follow these guidelines when using a CD-ROM drive:

The following illustration shows the front of the CD-ROM drive.

 

Handling a CD

When handling a CD, follow these guidelines:


Loading a CD

To load a CD into a CD-ROM drive:

  1.  Press the Eject/Load button. The tray slides out of  the drive.
     (Do not manually force the tray open.)
  2.  Place the CD in the tray with the label facing up.
  3.  Close the tray by pressing the Eject/Load button, or  by gently pushing the tray forward.
     When the tray is  closed, the CD-ROM drive In-Use light on the front of  the drive will activate to indicate that the drive is in use.
  4.  To eject the CD, press the Eject/Load button.
     When the tray slides out, carefully remove the CD.
  5.  Close the tray by pressing the Eject/Load button, or  by gently pushing the tray forward.


Notes:
  1.  If the tray does not slide out of the drive when  you press the Eject/Load button, insert the  pointed end of a large paper clip into the  emergency-eject hole located on the front of the CD-ROM drive.
  2.  In some models, you might have to remove the  front bezel that houses the CD-ROM drive so that  you can access the emergency-eject hole.


Back to  Jump to TOP-of-PAGE
More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.