Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Cover (Top) (Netfinity 7000 - 8651)



Cover (Top)

 
  1.  Top Cover Screws
  2.  Top Cover


To remove the server top cover:
  1.  Power-off the server and all attached devices and  disconnect all external cables and power cords.
  2.  Loosen the two screws -1- on the back edge of the  top cover.
  3.  Slide the top cover -2- slightly toward the rear of the  server, the cover will stop after about 25 cm (1 in.).  Lift the cover off the server and set the cover aside.

      For proper cooling and airflow, replace the top  cover before powering on the server. Operating  the server for extended periods of time (over 30  minutes) with the top cover removed might damage server components.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.