 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Running the Diagnostics (WP z50 - 2608)
Running the Diagnostics
The following table lists the special tools used in the diagnostics:
| Tool Name |
FRU P/N |
| Serial wrap connector |
05K2846 |
| PCMCIA wrap card |
35G4703 |
| CompactFlash wrap converter |
05K2845 |
Use either the TrackPoint or the cursor move keys to interact with the tests.
The Enter key works the same as selecting the OK icon to reply OK.
- Click Start, then Run.
In the Run dialog window Open box, type '\Windows\ibmdiag.exe', Click OK.
The basic diagnostic menu appears.
- Start the Advanced Diagnostic test by pressing Ctrl+A on the
basic diagnostic menu.
The Serial and PC Card devices will appear
on the diagnostic menu.
- Click on a device to run the test.
The test progress window appears. A confirmation message box will
appear after exiting each test, click Yes if the test ends without any errors.
PC Card Slot Test
Insert the PCMCIA wrap card into the PC card slot for the PCMCIA test, insert the
CompactFlash wrap converter into the CompactFlash slot for the CompactFlash slot test.
Refer to (above), 'Running the Diagnostics' to run the tests.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.