Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Cradle Checkout (WP z50 - 2608)



Cradle Checkout

Use the following procedure to isolate a problem with the cradle.
The cradle attaches to the system expansion connector at the bottom of the WorkPad z50.
  1.  Enter suspend mode.
  2.  Remove the failing device from the cradle.
  3.  Unplug the AC Adapter from the cradle, if attached.
  4.  Remove the cradle from the WorkPad z50.
  5.  Reconnect the failing device directly to the WorkPad z50.
     (If another device is already connected to the WorkPad z50, remove it first.)
  6.  If the failing device works properly, replace the cradle.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.