Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Numeric Error Codes (TP 570 - 2644)



Numeric error codes

Symptom / error    FRU / action in sequence
  
0200 1. Reseat the hard disk drive
Fixed disk failure 2. Load Setup Defaults in IBM BIOS Setup Utility
  3. Hard disk drive
  4. System board
  
0210, 0211
Stuck key Keyboard error 1. Run the keyboard test in the interactive tests and auxiliary
      input device
  
0212 1. Run the keyboard test in the interactive tests and auxiliary
Keyboard controller failure     input device
  
0213 1. Unlock external keyboard
Keyboard is locked -
Unlock key switch
0220 1. Load Setup Defaults in IBM BIOS Setup Utility
Monitor type does not match
CMOS - run setup
0230 1. System board
Shadow RAM failure at
offset nnnn
0231 1. DIMM
System RAM failure at 2. System board
offset nnnn
0250 1. Replace the backup battery and run IBM BIOS Setup Utility to
System battery is dead -     reset the time and date
Replace and run setup
0251 1. Replace the backup battery and run IBM BIOS Setup Utility to
System CMOS checksum bad -     reset the time and date
Default configuration used
0260 1. Replace the backup battery and run IBM BIOS Setup Utility to
System timer error     reset the time and date
  2. System board
  
0270 1. Replace the backup battery and run IBM BIOS Setup Utility to
Real time clock error     reset the time and date
  2. System board
  
0280 1. Load Setup Defaults in IBM BIOS Setup Utility
Boot incomplete error - 2. DIMM
Default configuration used 3. System board
  
0281 1. Load Setup Defaults in IBM BIOS Setup Utility
Memory size recognized by 2. DIMM
POST is different from that 3. System board
recognized by CMOS
02B0 1. Check that the drive is defined with the proper diskette type
Diskette drive error     in IBM BIOS Setup Utility
  2. Run the diskette diagnostics test
  
02D0 1. System board
System cache error -
Cache is disabled
02F0 1. System board
CPU ID
02F5 1. DIMM
DIMM test failure 2. System board
  
02F6 1. DIMM
Software NMI failure 2. System board
  
02F7 1. DIMM
Fail - Safe timer NMI failure 2. System board


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.