 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Audio Function Check
Audio Function Check
Do as follows:
- Boot from the diagnostics diskette and start the PQA program
(please refer to 'Running the PQA Diagnostics Program').
- If the test detects an audio board problem, do the following actions, one at a time, to correct the problem.
Do not replace a non-defective FRU.
- Check the speaker and the speaker connections.
- Replace the Audio I/O board.
- Replace the Audio and Battery Function Connection Board.
- Replace the system board.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.