 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Keyboard
Keyboard
To remove the keyboard:
- Use a flat-bladed screwdriver to release the latches to
lift the middle cover away.
- Remove the two screws securing the keyboard.
| Step |
Size (Quantity) |
Head & Color |
Torque |
| 3 |
M2 x 4L (2) |
Flat head, silver |
1.6 kgf-cm |
Note: Make sure you use the correct screw for replacement.
- Lift the keyboard up to expose the keyboard connector
- Use a flat-bladed screwdriver to release the cable
from the connector.
- Remove the keyboard from the lower case.
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.