 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Fan Diagnostics
Fan Diagnostics
The system is equipped with sensors to protect against system overheating.
By setting the video controller and processor thermal thresholds, the system can turn on the
cooling Fan ASM or shut down automatically when temperatures reach the defined threshold parameters.
Systems experiencing frequent auto sensor shutdown may need to reset the thermal sensor threshold
(refer to 'Setting the Thermal Sensor'') and execute the fan test to ensure the
cooling Fan ASM is operating normally.
Follow the steps below to use the Fan Diagnostics program:
- Boot from the Diagnostics Program Diskette.
- Select Fan Diagnostics from PC DOS 7.0 Startup menu.
- Follow the instructions on the screen to execute the fan diagnostics.
Note: If the test fails, try reseating the Fan ASM connector or
replacing the Fan ASM.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.