Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Error Messages (TP 240 - 2609)



Error Messages

Symptom/Error    FRU/Action in Sequence
Device Address Conflict 1. Load Setup Defaults in BIOS Setup Utility.
  2. System board
  
Allocation Error for: device 1. Load Setup Defaults in BIOS Setup Utility.
  2. System board
  
Failing Bits: nnnn 1. DIMM
  2. System board
  
Invalid System
Configuration Data    System board
  
I/O device 1. Load Setup Defaults in BIOS Setup Utility.
IRQ conflict 2. System board
  
Operating system not 1. Enter BIOS Setup Utility and see if the hard disk drive and
found     diskette drive A: are properly identified.
  2. Hard disk drive
  3. System board


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.