 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Diagnostic Error Codes (TP 560Z - 2640)
Diagnostic Error Codes
If an error is detected, the following appears:
- Large X on the left side of the device icon.
- Device ID (three digits).
- Error code (two digits).
- FRU code (four digits).
The device ID and error code indicate the detailed portion
of the FRU that caused the error. If replacing a FRU does
not correct the problem, see the device ID or error code
from the previous failure. If they have changed, the cause
might be that the new FRU is detective or that the FRU
was incorrectly installed.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.