How to Use Error Messages (TP 560Z

^{IBM-AUSTRIA - PC-HW-Support 30 Aug 1999}

How to Use Error Messages (TP 560Z - 2640)

How to Use Error Messages:

Use the error codes displayed on the screen to diagnose failures.
If more than one error code is displayed, begin the diagnosis with the first error code. Whatever caused the first error code can result in false error codes being displayed. If no error code is displayed, see if the error symptom is listed in the 'Symptom-to-FRU Index'.

Port Replicator Problems:

If you suspect a problem with the port replicator, see 'Port Replicator Checkout'.

How to Diagnose Multiple FRUs.

When the adapter or the device has more than one FRU, the error code could be caused by any of them. Before replacing multiple FRUs, try removing or exchanging each FRU, one by one in the designated sequence, to see if the symptoms change.

More INFORMATION / HELP is available at the IBM-HelpCenter

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.