 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Reset Switch (TP 600/600E - 2645)
Reset Switch
The reset switch resets the system (regardless of the microcode status) and forces the power off.
Use this push button to power off when power is not completely off or the microcode is in a hung state.
See 'Rear View' for the reset switch.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.