Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Indicator LED Checkout



Indicator LED Checkout

If an indicator LED problem occurs, do the following:
  1.  Power off the computer
  2.  Power on the computer. All the LEDs should turn on for a moment after the computer  is powered on.
  3.  Verify that all LEDs turned on.

     If some of the LEDs do not turn on, replace the sub card. If the problem  persists, replace the system board.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.