 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Running Fan Diagnostics Program (2600-310/310D/310E/310ED)
Running Fan Diagnostics Program
The system is equipped with sensors to protect against system overheating.
By setting video controller and processor thermal thresholds, the system can turn on the
cooling fan or shut down automatically when temperature reach the defined threshold parameters.
For systems experiencing frequent auto sensor shutdown, you might need to reset the thermal sensor threshold
(refer to 'Setting Thermal Sensor Threshold') and execute
the fan test to ensure the cooling fan is operating normally.
Follow the steps below to use Fan Diagnostics Program:
- Boot from the Diagnostic Program Disk.
- Select Fan Diagnostics from PC DOS 7.0 Startup Menu.
- Follow the instruction on screen to execute fan diagnostics
NOTE: If test failed, try reseating the fan connector or replacing the fan.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.