Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

PQA Diagnostic Program Error Codes and Messages (2600-310/310D/310E/310ED)



PQA Diagnostic Program Error Codes and Messages

Error
Code
Message FRU/Action in Sequence
16XX RTC (Backup
battery error)
Backup battery
1XXX CPU or System
board error
1. Reload BIOS default setting
2. CPU
3. System board
2XXX Memory error 1. Reseat CPU
2. DIMM
3. System board
3XXX Keyboard error 1. Reseat Keyboard
2. Keyboard
3. System board
4XXX Video error System board
5XXX Parallel Port error System board
6XXX Serial Port or
system board error
System board
7XXX Diskette drive error 1. Diskette drive
2. System board
8XXX Hard disk error 1. Load BIOS Default Setting
2. Hard disk connector board
3. Hard disk
9XXX CD-ROM error 1. Reseat CD-ROM cable
2. CD-ROM drive
3. System board
10XXX CPU or System
board error
1. CPU
2. System board
11XXX Pointing device
error
1. TrackPoint board FPC cable
2. TrackPoint board
3. Keyboard
4. System board
PCMCIA
XXXXX
PCMCIA error 1. Replace PC Card
2. PCMCIA slots assembly
3. System board


More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.