Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Systems Checkout (2600-310/310D/310E/310ED)



Power Systems Checkout

To verify the symptom of the problem, power-on the computer using each of the power sources as follows:
  1.  Remove the battery pack, diskette drive, and hard disk drive.
  2.  Connect the AC Adapter and check that power is supplied.
  3.  Install the diskette drive or hard disk drive  one at a time, and check that power is supplied from  each power source.


If you suspect a power problem, see an appropriate power supply check listed below.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.