Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Memory Checkout (2600-310/310D/310E/310ED)



Memory Checkout

Optional DIMMs are available for increasing memory capacity.
The following table show the possible combination of installed DIMMs.

DIMM DIMM Total
Memory		   DIMM DIMM Total
Memory
16MB 0MB 16MB   32MB 8MB 40MB
0MB 16MB 16MB   8MB 32MB 40MB
16MB 16MB 32MB   32MB 16MB 48MB
32MB 0MB 32MB   16MB 32MB 48MB
0MB 32MB 32MB   32MB 32MB 64MB


  This system will not work without DIMM memory installed.

Memory errors might stop system operations, show error messages on the screen, or hang the system.

Use the following procedure to isolate memory problems.

NOTE: Make sure that the DIMM adapter is properly installed in the connector. A loose connection can cause an error.

  1.  Power off the computer and replace the DIMM.
  2.  Boot from the diagnostics diskette and start the PQA program (refer to 'Running PQA Diagnostics Program')
  3.  Select Memory to run the memory test.


If no error appears, install a new DIMM, if an error appears, replace the system board.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.