|
|
|
| Symptom / Error | FRU / Action in Sequence |
|---|---|
| No beep, power-on indicator | 1. Go to 'Power Systems Checkout'. |
| not on and a blank LCD | 2. System Board |
| during POST. | 3. DC/DC card |
| 4. Power sources | |
| No beep, power-on indicator on, | 1. System Board |
| and a blank LCD during POST. | 2. DC/DC card |
| 3. CPU Card | |
| No beep, power-on indicator on, | 1. System Board |
| and a blinking cursor | 2. CPU Card |
| only during POST. | 3. DC/DC card |
| No beep during POST but | 1. Turn the volume up and check |
| but system runs correctly. | the speaker. |
| 2. Check whether the DSP card or audio (ESS) | |
| card connector is loose and reseat the connector. | |
| 3. Speaker | |
| 4. DSP card or audio (ESS) card | |
| 5. DC/DC card |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.