Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Power Systems Checkout (2625 365X, XD)



Power Systems Checkout

To verify the symptom of the problem, power on the computer using each of the power sources as follows:
  1.  Remove the battery pack, diskette drive, and hard disk drive.
  2.  Connect the AC Adapter and check that power is supplied.
  3.  Install the diskette drive or hard disk drive  one at a time, and check that power is supplied from  each power source.
  4.  Disconnect the AC Adapter, remove the hard disk and  diskette drive, and install the charged battery pack,  then check that power is supplied by the battery pack.


If you suspect a power problem, see the appropriate power supply check listed below.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.