 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
1080 Hard Disk Drive (2640-560x - 60x, 70x)
Hard Disk Drive
Do not drop or apply any shock to the hard disk drive
The hard disk drive is sensitive to physical shock. Incorrect handling can cause damage
and permanent loss of data on the hard disk. Before removing the hard disk drive, have the user make
a backup copy of all information on the hard disk. Never remove the hard disk drive while the system
is operating or is in suspend mode.
Remove the hard disk drive exactly as shown in the figure. Do not
apply any extra force to the hard disk drive when removing it.
+----+----+-------+
|Step|Qty |Torque | Screw No.
+----+----+-------+
1 1 4kgcm
-------------------
5 2 3kgcm
NOTE: Make sure you use the correct screw, and tighten
it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information
if you do not have a torque screwdriver.)
Back to 
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a
for any BUG on this page found - Thank you.