 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Displaying the Error Log (2640-560x - 60x, 70x)
Error Log
Diagnostic errors are printed
on a printer that is attached to the parallel port when the
error is detected.
The error is also logged in the system memory.
Use the following procedure to display the errors.
- Enter the advanced diagnostic test.
- Press Ctrl+E.
- The error log appears.
- To exit the screen, select the cancel icon or press Esc.
The error log is not saved when system power is turned-off.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.