|
|
|
| Symptom/Error | FRU / Action in Sequence |
|---|---|
| Unable to communicate using | 1. Make sure the setup for the IR is correct |
| the Infrared (IR) Port. | 2. Make sure there are no fluorescent lights |
| near the computer. The computer may receive | |
| optical noise from the fluorescent light. | |
| 3. Run the advanced diagnostic test. If an | |
| error occurs and a FRU code is displayed, | |
| replace the parts by the FRU code. |
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.