Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Loading the IBM ThinkPad 365 Advanced Diagnostics Diskette



Loading the IBM ThinkPad 365 Advanced Diagnostics Diskette

  To use the IBM ThinkPad 365 Advanced Diagnostics Diskette, you must have at least 500KB of free memory. Be sure to read the README.PO file on the IBM ThinkPad 365 Advanced Diagnostics Diskette before using the following instructions.
  1.  Power-off the computer.
  2.  Insert the IBM ThinkPad 365 Advanced Diagnostics Diskette into drive A.
  3.  Power-on the computer.
  4.  Follow the instructions on the screen and proceed to the  Main Menu. Allow two to four minutes for the diagnostic  programs to load.
  5.  At the Main Menu, select the test to run.
  6.  Press Enter to run the test selected.
  7.  After starting a test, do not press any key until prompted,  then follow the instructions on the screen.
  8.  When the test is completed, press Esc twice to return  to the main menu.
  9.  Select Exit.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.