 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
How to Run Diagnostics (2625)
How to Run Diagnostics
The QAPlus/PRO diagnostic program, developed by
DiagSoft for IBM, is the primary method of
testing the computer. It is unique to the ThinkPad 365 and will not
run on other models.
You can use it to test the IBM components
of the system and some external devices. The amount of time required to
test all components depends on the number of components. The more optional
adapters and devices you have attached to your system, the longer the
testing takes.
Before loading the diagnostics program:
- Go to a DOS full screen.
- Press Ctrl+Alt+F11 to go to the setup
screen.
- Verify all peripherals devices are enabled.
- Page Down to the second page and verify all peripherals are enabled.
The diagnostics program is intended to test only IBM products.
Non-IBM products, prototype cards, or modified options can give false
errors and invalid system responses.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.