Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Backup Battery Test (2523)



Backup Battery Test
  1.  Remove the backup battery.
  2.  Measure the voltage on the battery as shown below.

 

Pole Voltage (Vdc)
+ +2.8 to +3.2
- Ground


If the voltage is not correct, replace the backup battery.
If the voltage is correct, a short circuit or a failure in the system board has occurred. Replace the system board.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.