Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

Restore System Partition (9552)



Restore System Partition

If the above sequence does not correct the problem, do the following:
  1.  Power-off the computer.
  2.  Insert the backup copy of the Reference Diskette into the diskette  drive.
  3.  Power-on the computer.

    NOTE: If the I99900X5 error message appears, the power-on password has  been set. To disable the power-on password (see 'Power-On Password (700, 700C)')   before continuing with the next step.

  4.  Select Backup/Restore system programs from the Main Menu,  then select Restore the System Partition.
  5.  When the restore process completes,  select Set configuration, then select Run automatic configuration.
  6.  Power-off the computer and remove the backup  copy of the Reference Diskette from the diskette drive.
  7.  Power-on the computer.

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.