 |
IBM-AUSTRIA - PC-HW-Support 30 Aug 1999 |
Check Point (CP) Codes (9552)
Check Point (CP) Codes
Codes beginning with CP are displayed on the
LCD to indicate system
status during POST. The CP codes vary with the level
of microcode installed and the type of processor card installed.
The CP codes are not error codes. If the system detects an error,
the CP code is changed to a POST error message.
More INFORMATION / HELP is available at the IBM-HelpCenter
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.