Return to MAIN-Index  Return to SUB-Index    IBM-AUSTRIA - PC-HW-Support    30 Aug 1999

System Board



System Board

The processing functions for the computer are performed by the system board. When a numeric code calls out the system board, use the following procedure to isolate the problem.
  1.  Run the system board test to verify the symptom. This test verifies  the system board.  If no error is detected, return to 'General Checkout'
  2.  If FRU code 10 appears, replace the system board.
  3.  Rerun the test to verify the fix.


If above procedure does not correct the problem, go to 'Undetermined Problems'

More INFORMATION / HELP is available at the  IBM-HelpCenter

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.