United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
 

Maintenance & Service Guide
Presario 5800 Series Personal Computers

MSG Index | Home  |   Preface    |   Product Description   |   Troubleshooting   |   Illustrated Parts  
   Removal & Replacement |  Jumpers & Switches   |   Specifications  

Removal and Replacement

Refers only to Pentium III models

Removal Sequence
Chassis
Mass Storage Devices
Button Board
Digital Creativity
Imaging Center
Option Card Retainer
Graphics Board
PCI Cards
Memory
Processor
Processor Retention Clips
RTC Battery
System Board Cables
System Board
Parallel Port
Back I/O Panel
Power Supply

Removing Processor Goal Posts

Removing the Processor Retainer Clips
1. Complete the preparation for disassembly procedures.
2. Remove the chassis.
3. Remove the Processor.
4. Loosen the four push pins from the processor retainer clips. (Note: Use needle nose pliers or similar tool to remove push pins).
5. Remove the processor retention clips.

Replacement
To replace the processor retention clips, reverse the removal procedure.

 

 

1.800.AT.COMPAQ
 
privacy and legal statement