Deskpro 6000

Configuring System Board

• Pentium P5 Jumpers
• Pentium Pro Jumpers P6
• Pentium MMX Jumpers
• PII (Config Code BPQ2, BPP2, BNC2)
• PII (Except Config Codes BPP2, BNC2, BPQ2)

Pentium P5 Jumpers

	J-11 1 - 4 External Battery Connector 5 - 6 External Battery Jumper 6 - 7 Internal Battery Jumper
	Switch Block SW1 Processor S1 S2 S3 S4 100 *  OFF OFF ON 120 * ON OFF OFF 133 * ON OFF ON 166 * ON ON ON 200 * OFF ON ON *Power-On Password, ON = Disabled; OFF = Enabled Default = OFF
	Switch Block SW2 Upgrade Selected S1 S2 S3 S4 10 MB ON ON ON ON 100 MB* OFF OFF OFF OFF *Requires Option Module

Pentium Pro Jumpers P6

	E-2 1 - 4 External Battery Connector 5 - 6 External Battery Jumper 6 - 7 Internal Battery Jumper
	Switch Block SW1  Processor S1  S2  S3  S4  S5  S6  180  ON/OFF OFF  ON  ON  OFF  ON  200  ON/OFF ON  ON  ON OFF  ON  NOTE: Power-on-Password (ON =Disable, OFF = Enable "default") S2: ( ON=66MHz and OFF=60MHz Bus Freq.)
	Switch Block SW2 Upgrade Selected S1 S2 S3 S4 10 MB ON  ON  ON  ON  100 MB* OFF  OFF  OFF  OFF *Requires Option Module

Pentium MMX Jumpers

	J-11 1 - 4 External Battery Connector 5 - 6 External Battery Jumper 6 - 7 Internal Battery Jumper
	Switch Block SW1 Processor S1 S2 S3 S4 166 * ON ON ON 200 * OFF ON ON 233 * OFF OFF ON *Power-On Password, ON = Disabled; OFF = Enabled Default = OFF
	Switch Block SW2 Upgrade Selected S1 S2 S3 S4 10 MB ON ON ON ON 100 MB* OFF OFF OFF OFF *Requires Option Module   Switch Block SW2 Upgrade Selected S1 S2 S3 S4 10 MB ON ON ON ON 100 MB* OFF OFF OFF OFF *Requires Option Module

PII (Config Code BPQ2, BPP2, BNC2)

	E-2 1 - 4 External Battery Connector 5 - 6 External Battery Jumper 6 - 7 Internal Battery Jumper
	SW1 Settings Processor Speed S1 S2 S3 S4 S5 S6 S7 66/200 MHz * OFF ON ON ON OFF ON 66/233 MHz  * OFF ON ON ON OFF OFF 66/266 MHz * OFF ON ON OFF ON ON *Power -On Password ON = Disable; OFF = Enable; Default is OFF
	Switch Block SW2 Upgrade Selected S1 S2 S3 S4 10 MB ON  ON  ON  ON  100 MB* OFF  OFF  OFF  OFF *Requires Option Module

PII (Except Config Codes BPP2, BNC2, BPQ2)

	E50 Pins Function Description 1 - 2 Battery Internal Battery Jumper 2 - 3 Battery External Battery  5 - 6 Clear CMOS* Relocate Battery Jumper and Return 9 - 12 Battery External Battery Connection * Must also remove the AC power cord
	SW1 Settings Processor Speed S1 S2 S3 S4 S5 S6 66/233 MHz  * OFF OFF ON ON ** 66/266 MHz * ON ON OFF ON ** 66/300 MHz * ON OFF OFF ON ** 66/333 MHz * OFF ON OFF ON ** *Power -On Password ON = Disable; OFF = Enable; Default is OFF **AC Cord Connection OFF = Main P/S is OFF, Aux P/S is ON ON = Main P/S is ON, Aux P/S is ON