----- CUWE-RM ------ ----- BIOS ------ 1016cerm.zip CUWE-RM BIOS Revision 1012 (09/03/2001) 1. Support VIA C3 CPU. 2. Rename "VIA Cyrix III" CPUs to "VIA C3". 3. Support Intel Pentium III D-0 stepping CPU. 4. Fix Windows 98 cannot resume from S1 state for some wheel PS2 mouses. 5. Free 290h~297h I/O ports. 6. Calibrate CPU temperature for FCPGA CPU. 7. Add "wakeup key" setup option when "Wake Up By PS2 KB" is enabled in power menu of BIOS 8. Fix system cannot enter hibernate (S4 state) mode automatically after resuming from standby mode (S1 or S3 state) if power options of power scheme in control panel is enabled under Windows 2000. cerm1013.zip CUWE-RM BIOS Revision 1013 (11/29/2000) 1. November Release. cerm1012.zip CUWE-RM BIOS Revision 1012 (05/22/2000) 1. Fix PS2 keyboard/mouse cannot wake up the system from Suspend-to-RAM. 2. Fix Win98SE wake up from Suspend-to-RAM unexpectedly if USB is powered by +5Volt. 3. Fix some PS2 mouses work abnormally after resuming from S1 state. 4. Fix Genius PS2 Netmouse cannot be detected. 5. Fix "Onboard FDC Swap A&B" setup option has no function. 6. Fix Win98SE shows resource conflict if ECP and 3BCH/IRQ7 are selected in setup. cerm1010.zip CUWE-RM BIOS Revision 1010 (05/09/2000) 1. Fix the system cannot upgrade BIOS successfully if internal graphics is disabled. 2. Fix the system cannot be powered-up by PS/2 keyboard or mouse. 3. Fix PME not enabled for some cards. 4. Fix ASUS PC Probe shows CPU temperature much higher than the actual one after resuming from Suspend-to-RAM. 5. Fix PS/2 keyboard cannot wake up system under Win98 (Japanese) standby mode. 6. Change VGA BIOS to vb810301.dat. 7. Fix Win2000 APM cannot shutdown. 8. Support SmartLink mix with AC97 Modem Riser card. 9. Support 566MHz and 850MHz CPU. 10. Support ADI AD1881A codec. cwerm108.zip CUWE-RM BIOS Revision 1008 (02/02/2000) 1. First Release. ----- Manual ------ cuwerm-101.pdf Manual Rev.1.01/English (microATX, e474, Nov/99)