This document is for the full-sized (13.8" x 12.025") 486-25 ISA motherboard.  

The part number for this board is 09-00025-xx.



It's identifying features are: an LED between expansion slots #5 and #6; eight 16-bit 

expansion slots; sixteen sockets for SIMMs (four banks of 4); a socket for a Weitek 4167 

coprocessor.



The bus speed for this motherboard is fixed at 8MHz.





+=============================+

+                             +

+ MOTHERBOARD SWITCH SETTINGS +

+                             +

+   * = Default setting       +

+=============================+



SW1

---

1  Internal cache enabled   *On

   Internal cache disabled   Off



2  Enable on-board Bios     *Off

   Enable external Bios      On



3  Reserved                 *On



4  External cache enabled   *On

   External cache disabled   Off



5  Bios relocation enabled   On

   Bios relocation disabled *Off



6  Reserved                 *Off



7  CGA / EGA / VGA          *On

   Monochrome                Off



8  Reserved                 *Off





SW2

---

1  Memory size (see below)

2  Memory size (see below)

3  Memory size (see below)

4  Memory size (see below)



5  Reserved                    *Off



6  D00000-EFFFFF cacheable     *Off

   D00000-EFFFFF non-cacheable  On



7  64K or 256K external cache   Off

   128K external cache          On



8  64K external cache           Off

   128K or 256K external cache  On







DIP switch settings for memory size

===================================

Memory         Banks           DIP Switch 2

-----------------------------------------------

 MB      0    1    2    3    S1   S2   S3   S4  

----    ---- ---- ---- ---- ---- ---- ---- ----

 1MB    256K                 ON   ON   ON   ON

 2MB    256K 256K            OFF  ON   ON   ON

 3MB    256K 256K 256K       ON   OFF  ON   ON

 4MB    256K 256K 256K 256K  OFF  OFF  ON   ON

 4MB    1MB                  ON   ON   OFF  ON

 5MB    256K 1MB             ON   ON   OFF  OFF

 6MB    256K 256K 1MB        ON   OFF  ON   OFF

 7MB    256K 256K 256K 1MB   OFF  ON   ON   OFF

 8MB    1MB  1MB             OFF  ON   OFF  ON

 9MB    256K 1MB  1MB        ON   OFF  OFF  OFF

10MB    256K 256K 1MB  1MB   OFF  OFF  ON   OFF

12MB    1MB  1MB  1MB        ON   OFF  OFF  ON

13MB    256K 1MB  1MB  1MB   OFF  OFF  OFF  OFF

16MB    1MB  1MB  1MB  1MB   OFF  OFF  OFF  ON



In the table above, 256K indicates that four 256Kx9 SIMMs are installed in the bank,

and 1MB indicates that four 1Mx9 SIMMs are installed in the bank.  The above shows 

all of the possible memory configurations.



The maximum amount of memory supported by this board is 16MB.



Micronics Computers has tested and verified the following memory brands:

Toshiba, Siemens, Mitsubishi, NEC





+=============================+

+                             +

+ MOTHERBOARD JUMPER SETTINGS +

+                             +

+=============================+





J2  External 6-volt battery connector

  Pin 1 - Battery Positive

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - Ground



J22  External speaker

  Pin 1 - Speaker

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - +5 volts DC



J23  Keylock / Power LED

  Pin 1 - Power LED signal

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - Keyboard lock signal

  Pin 5 - Ground



W2  Reserved

  Pins 2-3



W4  Reset switch

  Pin 1 - Signal

  Pin 2 - Ground



W5  Turbo LED

  Pin 1 - Signal

  Pin 2 - Ground



W6  Turbo switch

  Pin 1 - Signal

  Pin 2 - Ground



W8  External cache configuration

  Pins 1-2 - 64K

  Pins 2-3 - 128K or 256K



W9  External cache configuration

  Pins 1-2 - 64K or 128K

  Pins 2-3 - 256K