486-GIO-VT



Item: AMD DX2 66 jumper settings



     Hereunder are the jumper settings for AMD DX2 66Mhz.

     

     

     JC1 ----------------- 1-2 shorted

     JC2 ----------------- 1-2 shorted

     JC3 ----------------- Shorted

     JC4 ----------------- Open

     JC5 ----------------- Shorted

     JC7 ----------------- 1-2 shorted

     

     RN21 ---------------- empty

     RN22 ---------------- empty

     RN23 ---------------- empty

     

     

     JCX1 ----------------  Open

     JCX2 ---------------- 1-2

     

     

     JX1 ----------------- 2-3

     

     

     JK1 ----------------- 2-3

     JK2 ----------------- 2-3

     JK3 ----------------- 1-2

     JK4 ----------------- 1-2

     

     Sincerely yours,

     

     

     Tech Support

     (REV)

_____________________________ Reply Separator _________________________________

Subject: 486-GIO-VT

Author:  Matthias Decker <deckerm@uni-muenster.de> (by way of FIC Tech Support 

<tech@ss1.fic.com.tw>) at internet-mail

Date:    10/13/97 3:16 PM





Hello,

     

1. I want to change the CPU on my 486-GIO-VT and can't find - I'm really 

sorry... - the manual. The still working CPU is a AMD DX-40, the new one 

a AMD DX 2-66. The instructions onboard show, that there is no need to 

change jumpers for the CPU-Model, but I can't find any informations 

about jumpers for CPU-speed. I tried the AMD-66 and BIOS recognized it 

as 80 MHz-model.

2. Is there a possibility to use the two PS2-banks without the first 

SIMM bank? There are 4 MB, 8 MB, 8 MB in the banks now, but the BIOS 

detects only 16 MB.

     

Thanks for your support in advance,

Rolf Bartusel

Muenster, Germany