This document is for the baby-sized (13.3" x 8.5") Baby Gemini 486SX-25 motherboard.  

It is also known as the "Upgradeable" board because it can accommodate the Intel

OverDrive CPU.  The part number for this board is 09-00145-xx.



It's identifying features are: an LED between expansion slots #5 and #6; eight 16-bit 

expansion slots; four sockets for SIMMs (using 72-pin SIMMs); one proprietary 80-pin 

SIMM socket which accommodates a Micronics External Cache Card.



The bus speed for this motherboard is fixed at 8MHz.





+=============================+

+                             +

+ MOTHERBOARD SWITCH SETTINGS +

+                             +

+   * = Default setting       +

+=============================+



SW1

---

1  Memory size (see below)

2  Memory size (see below)

3  Memory size (see below)

4  Memory size (see below)



5  Reserved             *Off

6  Reserved             *Off

7  Reserved             *Off

8  Reserved             *On







DIP switch settings for memory size

===================================

Memory         Banks           DIP Switch 2

-----------------------------------------------

 MB      0    1    2    3    S1   S2   S3   S4

----    ---- ---- ---- ---- ---- ---- ---- ----

 4MB     4M                  ON   ON   ON   ON

 8MB     4M   4M             OFF  ON   ON   ON

12MB     4M   4M   4M        ON   OFF  ON   ON

16MB     4M   4M   4M   4M   OFF  OFF  ON   ON

16MB    16M                  ON   ON   OFF  ON

20MB     4M  16M             ON   ON   OFF  OFF

24MB     4M   4M  16M        ON   OFF  ON   OFF

28MB     4M   4M   4M  16M   OFF  ON   ON   OFF

32MB    16M  16M             OFF  ON   OFF  ON

36MB     4M  16M  16M        ON   OFF  OFF  OFF

40MB     4M   4M  16M  16M   OFF  OFF  ON   OFF

48MB    16M  16M  16M        ON   OFF  OFF  ON

52MB     4M  16M  16M  16M   OFF  OFF  OFF  OFF

64MB    16M  16M  16M  16M   OFF  OFF  OFF  ON



In the table above, 4M indicates that one 1Mx36 SIMM is installed in the socket,

16M indicates that one 4Mx36 SIMM is installed in the socket.  The above shows all 

of the possible memory configurations.



When installing more than 16MB of memory, BIOS relocation must be disabled.  Bios 

relocation copies the video Bios (C0000-C7FFF) and the system ROM Bios (F0000-FFFFF) into

RAM.  The motherboard adds 15MB to these addresses (F00000) to be able to differentiate 

between the ROM and RAM.  Enabling the relocation feature causes the memory above 16MB 

to become non-contiguous and therefore inaccessible.



Micronics Computers has tested and verified the following 1Mx36 memory brands:

Micron Technologies, Mitsubishi, Samsung, Texas Instruments, Toshiba



Micronics Computers has tested and verified the following 4Mx36 memory brands:

Mitsubishi, Samsung, Toshiba



+=============================+

+                             +

+ MOTHERBOARD JUMPER SETTINGS +

+                             +

+=============================+





J5  External 6-volt battery connector

  Pin 1 - Battery Positive

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - Ground



J7  Keylock / Power LED

  Pin 1 - Power LED signal

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - Keyboard lock signal

  Pin 5 - Ground



J8  External speaker

  Pin 1 - Speaker

  Pin 2 - no connector

  Pin 3 - Ground

  Pin 4 - +5 volts DC



W1  Turbo LED

  Pin 1 - Signal

  Pin 2 - Ground



W2  Reset switch

  Pin 1 - Signal

  Pin 2 - Ground



W3  Turbo switch

  Pin 1 - Signal

  Pin 2 - Ground